ترجمه مکانیک و صنایع - 12 صفحه
سال 2015
Electrical discharge machining of metal doped Y-TZP/TiC nanocomposites
ماشین کردن تخلیه الکتریکی کامپوزیت های نانو فلزی تخدیری Y-TZP/TiC
http://dx.doi.org/10.1016/j.jeurceramsoc.2015.05.008
Philipp Ninz, Richard Landfried, Frank Kern, Rainer Gadow
دانلود رایگان مقاله انگلیسی - ماشین کردن تخلیه الکتریکی کامپوزیت
چکیده:
سرامیک های انتشاری تخلیه الکتریکی یک ترکیب فوق العاده از ویژگی هایی از جمله سختی زیاد، مقاومت بالا، قدرت و سفتی می باشند. به علاوه آن امکان ساخت بخش های پیچیده را فراهم کرده و محدودیت های این ویژگی ها را از بین می برند.
در این مطالعه، اثر اجزای نانو فلزی روی قابلیت ماشینی کردن تخلیه الکتریکی و ویژگی های مکانیکی سرامیک هایی با پایه زیرکونیوم – TiC بررسی شده است. یک زیرکونیوم پایدار شده با ایتریوم 2.6 مول درصد با 24 درصد حجم TiC با ذرات نانو 2 درصد حجمی آهن و کبالت تخدیر شد. نمونه ها تحت حرارت 1400 درجه سانتی گراد و با فشار 50 مگاپاسکال فشرده شدند. ویژگی های مکانیکی و الکتریکی نیز اندازه گیری شدند. ماشینی کردن تخلیه الکتریکی با قالب های غوطه ور انجام شد و از نظر سرعت پردازش و کیفیت سطحی مورد بررسی قرار گرفت. ذرات فلزی بسیار تحت تاثیر فرآوری پودری قرار گرفته و در نتیجه ویژگی های مکانیکی ان ها نیز تغییر کرد. ذرات فلزی باعث کاهش رسانایی الکتریکی مواد شده و عملکرد ماشینی شدن تخلیه الکتریکی را تخریب کردند.
کلیدواژه ها: زیرکونیوم، فلزی، نانوکامپوزیت، ماشینی کردن تخلیه الکتریکی.
Abstract
Electrical discharge machinable dispersion ceramics offer an extraordinary combination of properties such as high hardness, wear resistance, strength and toughness. Furthermore they enable the economic manufacturing of complex shaped parts overcoming the limits these properties imply for their manufacturing by conventional techniques.
This study investigates the influence of metallic nanosized inclusions on the ED-machinability and the mechanical properties of zirconia-TiC based ceramics. A 2.6 mol% yttria stabilized zirconia with 24 vol.% TiC was doped with 2 vol.% nanosize inclusions of iron, nickel and cobalt. Samples were hot pressed at 1400 °C and 50 MPa. Mechanical and electrical properties were measured. Die sink ED-machining was performed and assessed in terms of processing speed and surface quality. Metallic inclusions strongly influenced powder processing and sintering behavior and thus the mechanical properties. Metallic particles reduced the electrical conductivity of the materials and deteriorated ED-machining performance.
Keywords
Zirconia; Metal; Nanocomposite; Electrical discharge machining
